楚雄伸缩缝止水带 300*8

楚雄伸缩缝止水带 300*8

橡胶止水带的施工与安装

Construction and installation of rubber water stop

在橡胶止水带施工过程中，要求并保持止水带应与混凝土结合紧密可靠；能对完工后的施工质量进行检测；如果因为止水带质量或施工质量等原因，造成施工缝渗水，应设置第二道防水防线，可进行***快速、***经济、***有效的修补，且修补后的防水质量可靠耐久。根据在工程中的使用情况又可分类为埋式橡胶止水带和背贴式橡胶止水带。该材料具有良好的弹性,耐磨性、耐老化性和抗撕裂性能,适应变形能力强、防水性能好,以及受强烈的氧化作用或受油类等有机溶剂侵蚀时,均不得使用橡胶止水带. 广泛应用于施工缝、变形缝桥梁伸缩缝的施工，具有可检测、可注浆修补特点的止水带；该产品可适用于所有地下防水、排水结构的工程建设中，如挡水坝、蓄水池、地铁隧道、地下室等。中埋可注浆式止水带***大的特点就是可检测、可注浆修补，这也是传统的止水带在防水的过程中***大的弱点，即使防水性能再好的止水带在变形缝与施工缝的施工过程中，如果施工质量不达标，水仍然可以从止水带与砼间的缝隙渗出，引起漏水；另外止水带的接缝质量差也是引起施工缝漏水的主要原因。

In the construction process of the rubber sealing belt, requirements and maintain close and reliable waterstop shall be combined with the concrete; it can detect the quality of construction completion; if for strip quality or construction quality and other reasons, resulting in leakage of construction joints should be set, second water line, can be fast, economical, * * * * * * * * * effective repair, reliable durable and waterproof quality after repair. According to the use in the project, it can be classified as buried rubber stopping belt and back sticking rubber water stop belt. The material has good elasticity, abrasion resistance, aging resistance and tear resistance to deformation ability, good waterproof performance, and strong oxidation by oils or organic solvents such as erosion, are not allowed to use the rubber sealing belt. Widely used in construction joints, deformation joint construction of bridge expansion joint, with can detect and repair features with sealing grouting; the product can be applied to all underground waterproof and drainage structure in engineering construction, such as dams, reservoirs, subway tunnels, underground etc.. Buried in the grouting sealing belt * * * big feature is detected, grouting repair, which is the traditional waterstop waterproof process in * * * big weakness, even with good waterproof performance in deformation joint construction process and construction joints, if the construction quality standards, and water can still be the gap between the concrete leakage caused by Water Leakage from waterstop; sealing seams with poor quality also is mainly caused by the Water Leakage construction joint.

楚雄伸缩缝止水带 300*8

在使用止水带时要将止水带部分或全部浇埋在混凝土中,混凝土中有许多尖角的石子和锐利的钢筋头，由于塑料和橡胶撕裂强度比拉伸强度低３－５倍，止水带一旦被刺破或撕裂时，不需很大外力裂口就会扩大，所以在止水带定位和混凝土浇捣过程中，应注意定位方法和浇捣压力，以免止水带被刺破，影响止水带的止水效果，在施工中，在混凝土浇注过程式中把橡胶止水带部分或全部浇埋在混凝土中，如果混凝土中有许多尖角的石子和锐利的钢筋头，由于橡胶的撕裂强度比拉伸强低3-5倍，因此一旦被刺破或撕裂时，不需很大外外力裂口就会扩大，所以在止水带定位和混凝土浇捣过程中，应注意定位方法和浇捣压力,以免止水带被刺破，所以在止水带定位和混凝土浇捣过程中，应注意定位方法和浇捣压力，以免被刺破，影响止水带的防水效果,具体注意事项如下:

To strip of all or part of pouring buried in concrete in the use of sealing strip, there are many sharp stones and sharp head reinforced concrete, because the plastic and rubber tear strength than low tensile strength 3 - 5 times, once the waterstop is punctured or torn, without a lot of external force will expand, so in the waterstop positioning and concrete pouring process, should pay attention to positioning method and pouring pressure, so as to avoid the water stop is punctured, affecting the sealing effect of waterstop, during construction, the rubber sealing strip of all or part of pouring buried in concrete in concrete pouring process, if there are many sharp stones and steel sharp head in concrete, because the tear strength of rubber and low tensile 3-5 times, so once punctured or torn, without external force gap will expand, so in the waterstop set And the concrete pouring process, should pay attention to positioning method and pouring pressure, so as to avoid the water stop was punctured, so in the waterstop positioning and concrete pouring process, should pay attention to positioning method and pouring pressure, so as not to be punctured, affect the waterproof effect of waterstop, specific considerations are as follows:

楚雄伸缩缝止水带 300*8

A、橡胶止水带不能长时间露天曝晒，防止雨淋，勿与污染性强的化学物质接触。产品应存放场所***好保持-10℃－+30℃，相对湿度在40%－80%。

A, rubber sealing tape can not be exposed to the outdoor for a long time, to prevent rain, do not contact with heavy polluting chemicals. The product should be stored places to keep -10 +30 * * * C C, relative humidity in 40%80%.

B、在产品的运输和施工中，防止机械，钢筋损伤。成品存放和运输中应取直平放，勿加重压。

B, in the transportation and construction of the product, to prevent mechanical, steel damage. In the storage and transportation of the finished product, it should be taken straight and flat, without heavy pressure.

C、在施工过程中，产品安装必须固定，避免在浇注混凝土时发生位移，保证止水带在混凝土中的正确位置。

C in the construction process, the product installation must be fixed, to avoid displacement during pouring concrete, and to ensure the correct position of the water stop in concrete.

D、通常我们固定止水带的方法有：利用附加钢筋固定；专用卡具固定；铅丝和模板固定等，如需穿孔时，只能选在止水带的边缘安装区，不得损伤其它部分。

D, we usually fixed strip methods are: the use of additional reinforcement fixation; special fixture fixed; the wire and the fixed template, such as perforation, can only choose the installation area on the strip edge, not to damage other parts.

E、用户定货时应根据工程结构，设计图纸计算好产品长度，异型结构要有图纸说明，尽量在工厂中将止水带连接成整体，如需在现场连接时，可采用电加热板硫化粘合或冷粘接(橡胶止水带)或焊接(塑料止水带)的方法，如用户连接有困难，我公司可派技术人员现场指导。

E, the user order should be based on the engineering structure design drawings, calculate the length of products, have special structure drawings and specifications, try to connect into a whole band in the factory will stop, if necessary in the field of connection, can use electric heating plate vulcanization bonding or cold bonding (rubber waterstop) or welding (plastic waterstop). Methods, such as the user is connected with the difficulties, our company can send technical personnel on-site guidance.

橡胶止水带的产品用途：

Product application of rubber sealing strip:

橡胶止水带可以广泛应用于各种类型的混凝土结构中，例如：挡水坝、蓄水池、地铁、涵洞、隧道等地下工程中。以一些建筑工程中，由于不能连续浇铸，或由于地基的变形，或由于温度变化引起的混凝土构件的热胀冷缩等原因，在浇铸时常留有变形缝、施工缝，这些缝的防渗漏问题就要采用在变形缝的部位就必须使用橡胶止水带的方法来解决，它既能防止地下水或外界水渗漏到建筑物结构中，又可防止建筑内的水漏到外界。被广泛就用于污水处理厂，水厂，拦水坝，水电站等地下混凝土伸缩缝。 所有产品采用国家标准GB18173.2-2000标准组织生产的，尺寸公差一律按国家标准执行，如用户有特殊要求，可按用户要求制造。

Rubber seals can be widely used in various types of concrete structures, such as dams, reservoirs, subways, culverts, tunnels and other underground works. In some construction project, due to the continuous casting, or as a result of the ground deformation, or caused by temperature change of concrete thermal expansion and contraction, often left in the casting deformation joints, construction joints, the method of anti leakage joint problem should be used in a joint deformation must use the rubber sealing belt to solve the problem, it can prevent the water leakage of groundwater or external to the building structure, and can prevent water leakage to outside buildings. It is widely used in sewage treatment plants, water plants, dams, underground hydropower station concrete joints. All products are manufactured in accordance with the national standard GB18173.2-2000 standard. The size tolerances shall be carried out according to the national standards. If the users have special requirements, they can be manufactured according to the user's requirements.

楚雄伸缩缝止水带 300*8

企业名片