自贡651型止水带规格及价格

自贡651型止水带规格及价格

651型止水带，这是一种主要用于在混凝土变形缝、伸缩缝等混凝土内部设置的止水带产品，具有以橡胶材料弹性和结构形式来适应混凝土伸缩变形的能力。本产品是利用橡胶的高弹性和压缩变形性，在各种荷载下产生弹性变形，从而起到紧固密封有效地防止建筑构件的漏水，渗水，并起到减震缓冲作用，可确保工程建筑物的使用寿命。

651 watertight strip, which is a mainly used for sewing, expansion joint seal of concrete internal set with product deformation in concrete, has the ability to adapt to concrete deformation with elastic rubber material and structure. This product is the use of rubber elasticity and high compression deformation, elastic deformation under various loads, so as to effectively prevent the sealing of building components Water Leakage, seepage, and play a cushioning, can ensure the service life of the building project.

二、用途及适应温度

Two 、 usage and adaptation temperature

651型止水带主要用于混凝土现浇时必须设有的永久性变形缝内，如水渠、隧道引出口、挡水坝、输水渡槽等。中埋式橡胶止水带适应温度：普通型：-25℃-+60℃；耐寒型：-40*C-+60℃

The 651 type water stop belt is mainly used for permanent deformation joints in concrete pouring, such as channel, tunnel, outlet, dam, aqueduct and so on. Embedded rubber water stop temperature: ordinary type: -25 degrees -+60 degrees; cold resistant type: -40*C-+60 degrees centigrade

。

自贡651型止水带规格及价格

三、分类

Three, classification

1、651型止水带产品分类从材料选择来区分可分为中埋式橡胶止水带、中埋式PVC止水带、中埋式止水带接头和中埋式遇水膨胀止水带等。

1, 651 type water stop product classification from the choice of materials to distinguish, can be divided into buried rubber water stop belt, buried PVC water stop belt, buried water seal joint and embedded water expansion water stop belt and so on.

2、从结构形式上可分为CB型止水带和CP型止水带两种。

2, from the structural form can be divided into CB type water stop belt and CP type water stop belt two.

四、选用标准

Four, selection criteria

我们对于此种橡胶止水带设计及选用标准：

We design and choose the standard for this kind of rubber stop belt:

在工程设计及施工选用过程中，CB型止水带的宽度及厚度应按以下条件确定:

In the process of engineering design and construction selection, the width and thickness of CB type water stop belt shall be determined according to the following conditions:

1、水压小于4m,水平和垂直变形量不超过10mm

1 、 the water pressure is less than 4m, the horizontal and vertical deformation is not more than 10mm

时，止水带的宽度不宜小于200mm，厚度不宜小于5mm；

The width of the water stopping belt shall not be less than 200mm, and the thickness shall not be less than 5mm;

2、水压为4-8m，水平和垂直变形量不超过30mm时，CB型止水带的宽度不宜小于300mm，厚度不宜小于6mm；

2, the water pressure is 4-8M, the horizontal and vertical deformation amount is not more than 30mm, the width of CB type water stop belt should not be less than 300mm, the thickness should not be less than 6mm;

3、水压大于8m,水平和垂直变形量超过30mm时，CB型止水带的宽度不宜小于350mm

自贡651型止水带规格及价格

3, water pressure is greater than 8m, horizontal and vertical deformation exceeds 30mm, the width of CB type water stop belt shall be less than 350mm

,厚度不宜小于8mm；

The thickness should not be less than 8mm;

4、水压不大于8m,水平变形量不超过20mm，当无垂直变形时，CB型止水带的宽度不宜小于200mm,厚度不宜小于5mm。

4, the water pressure is not greater than 8m, the horizontal deformation is not more than 20mm, when there is no vertical deformation, the width of CB type water stop should not be less than 200mm, the thickness should not be less than 5mm.

除此之外，当结构断面尺寸大于500mm时，CB型止水带的宽度不宜小于300mm，当CB型止水带进行弯曲放置时，其转弯半径不得小于300mm。中埋式橡胶止水带产品标准按止水带GBl8173.2—2000是利用橡胶的高弹性和压缩变形性，在各种荷载下产生弹性变形，从而经济型中埋式橡胶止水带起到紧固密封有效地防止建筑构件的漏水，渗水，并起到减震缓冲作用，可确保工程建筑物的使用寿命。本产品主要用于混凝土现浇时必须设有的永久性变形缝内，如水渠、隧道引出口、挡水坝、输水渡槽等。

In addition, when the size of the structural section is greater than 500mm, the width of the CB type water stop belt shall not be less than 300mm, and when the CB type water stop is bent, the turning radius of the belt shall not be less than 300mm. In the embedded rubber water stop belt products according to the standards of the waterstop GBl8173.2 - 2000 is the use of rubber with high elasticity and compression deformation, elastic deformation under various loads, and economical in embedded rubber water stop belt sealing to effectively prevent the fastening of building components Water Leakage, seepage, and play a buffer role, can be to ensure the service life of the building project. This product is mainly used for concrete cast in must be permanent deformation joints, such as canals, tunnels, export, dam, aqueduct and so on.

自贡651型止水带规格及价格

 

企业名片