Dimming socket可调光插座

光控产品符合ANSI C136.10 & ANSI C136.41标准;

电压可定制；

质优价廉；

有美国UL 认证；

国内国外通用；

详情或者其他问题可咨询业务员：+86-15021834976；

Basic Specification:Rated Voltage0~480VAC

Loading CapacityAWG#14: 15Amp max. / AWG#16: 10Amp max.

Ambient Temperature-40oC ~ +70oC

Rated Frequency50/60Hz

Voltage0-480VAC

All the JL-240 series photocontrol receptacles were designed for the lanterns those intended to have an

ANSI C136.10-2006 receptacle to fit a twist-lock photocontrol. This series conform newly published ANSI

C136.41-2013 to allow a LED lamp multi-controlled through the receptacle.

This series offers 2 or 4 gold-plated low voltage pads on the top surface to fit photocontrol has ANSI

C136.41 conforming spring contacts, and offers male quick connectors at rear back for signal connection.

This series also offers 360 degree rotation limiting feature to conform ANSI C136.10 requirements.

Both JL-240X and JL-240Y have been recognized, and JL-200Z14 has been listed by UL to applicable US

and Canadian safety standards, under their file E188110, Vol.1 & Vol.2.

Installation:

Disconnect power; wire the receptacle according

to the diagram in right hand. An arrow indicating NORTH on the top of the receptacle is used to

assist correct direction. Push the photocontroller on and twist it clockwise to lock it into the receptacle.

Adjust the receptacle position if necessary.

JL-240Y series supports tool-free rotation.

JL-240Z series supports Wall-mount and rotation.

企业名片