节能热油泵〝常州市武研热油泵有限公司〞节能热油泵吸入和突出管路也应有管架或支撑,泵不允许承受管路的负荷。节能热油泵管道上的热膨胀所产生的应力,节能热油泵如果传递到泵机上,会造成泵机变形,损坏链轴器和轴承以及泵轴等,所以在靠近节能热油泵泵体时,一定要进行支撑。Energy saving heat pump suction and highlight the line also
should have the pipe rack or support, pump are not allowed to bear load of
pipeline. Energy saving heat pump produced by the thermal expansion of the
piping stress, energy saving heat pump if passed to the pump machine, will
cause the deformation of pump, shaft and bearing damage chain as well as the
pump shaft and so on, so close to the energy-saving heat pump when the pump
body, be sure to support.
地 址:常州市武进区横林镇横玉路247号
节能泵规格型号 | |||||||
型号 |
流量 m3/h |
扬程 m |
转速 r/min |
功率KW |
效率 n% |
气蚀余量 m |
|
轴功率 | 配用功率 | ||||||
150-125-270 | 130 | 15 | 1460 | 9.46 | 11 | 68 | 2.2 |
150-125-330 | 120 | 35 | 1460 | 12 | 15 | 72 | 3.2 |
150-125-280 | 180 | 20 | 1460 | 15.9 | 18 | 70 | 3.5 |
150-125-290 | 200 | 25 | 1460 | 18.92 | 22 | 72 | 3.6 |
150-125-310 | 200 | 32 | 1470 | 25.8 | 30 | 70 | 3.6 |
150-125-340 | 120 | 45 | 1460 | 16 | 18 | 74 | 3.8 |
150-125-350 | 130 | 45 | 1460 | 18.92 | 22 | 70.8 | 3.8 |
150-125-360 | 150 | 50 | 1470 | 25.8 | 30 | 72 | 3.9 |
150-125-370 | 180 | 50 | 1480 | 29 | 37 | 72.6 | 4 |
175-150-380 | 190 | 50 | 1480 | 30 | 37 | 73.2 | 4 |
200-150-390 | 250 | 50 | 1480 | 38.7 | 45 | 74 | 4.5 |
200-150-400 | 300 | 50 | 1480 | 44.2 | 55 | 76 | 4.5 |
200-150-410 | 400 | 50 | 1480 | 56 | 75 | 78 | 4.9 |
200-150-420 | 230 | 60 | 1480 | 39.2 | 45 | 74.6 | 5 |
200-150-430 | 270 | 60 | 1480 | 47 | 55 | 75.2 | 5.5 |
200-150-440 | 360 | 60 | 1480 | 63 | 75 | 76.5 | 5 |
200-150-450 | 420 | 60 | 1480 | 78 | 90 | 78 | 6.8 |
250-200-450 | 500 | 50 | 1480 | 92 | 110 | 78 | 7.2 |
250-200-460 | 460 | 60 | 1480 | 97 | 110 | 80.6 | 8 |
250-200-470 | 560 | 60 | 1480 | 115 | 132 | 80.6 | 8.6 |
200-150-480 | 300 | 72 | 1480 | 67 | 75 | 78 | 7 |
200-150-490 | 350 | 72 | 1480 | 80 | 90 | 76.8 | 7.5 |
200-150-500 | 400 | 72 | 1480 | 98 | 110 | 79.2 | 9 |
350-250-500 | 600 | 72 | 1480 | 142 | 160 | 80.2 | 9.6 |