多头石材浮雕雕刻机

适用范围：

◆多机头雕刻（2-6个主轴，可定制）同样的图案可多机头雕刻，极大的提高了工作效率。
◆ 床身采用厚壁钢管焊接而成，经高温回火处理，确保机身变形小，刚性好，强度大。
◆ Y轴采用双电机驱动，精选配对，确保运动平稳。
◆ 采用高精级齿轮齿条传动，精度高，速度快，力量大。
◆ 采用进口方形直线导轨，精度高，承重冗余大，寿命长。
◆ 机电全优设计，精选各种电气配件，将故障率降到*低。
◆ 机床配有水槽及自动供水冷却系统。
◆ 全部防尘防水设计，全方位保护机器传动部件。
◆ 应用范围：天然大理石、花岗岩、人造石、墓碑、里程碑、瓷砖、玻璃等材料的三维浮雕及线雕、切割、倒边、钻孔二维雕刻。

技术参数：

主轴功率: 3KW/ 4.5KW /400HZ/24000rpm/min

额定功率:800W

电源要求:Ac380V±5% 50HZ（110V 50HZ）

加工尺寸:1300×2500×230mm

空程速度:0—8800mm/min

主轴转速 6000～24000rpm

刀具直径 Ф3～Ф12.7

*大的雕刻速度: 6m/min

加工雕刻精度： <0.5/300mm

石材雕刻机www.luyisd.com

Scope of application:

◆ multi-head sculpture (2-6 spindles can be customized) the same pattern can be multi-head carving, greatly improves the working efficiency.
◆ bed thick-walled steel pipe is welded by high-temperature tempering treatment to ensure that body deformation, good rigidity, high strength.
◆ Y-axis, dual-motor drive, select matching to ensure smooth movement.
◆ Using high accurate rack and pinion, high precision, speed, strength.
◆ Imported square linear guides, high precision, bearing large, redundancy and long service life.
◆ Electrical and Mechanical with excellent design, featuring a variety of electrical accessories, the failure rate to a minimum.
◆ The machine is equipped with a sink and automatic water cooling system.
◆ All dust and water resistant design, full protection of machinery transmission parts.
Range of applications: three-dimensional relief of natural marble, granite, artificial stone, tombstone, milestone, ceramic tile, glass and other materials, and line engraving, cutting down side, drilling two-dimensional sculpture.



Technical parameters:

Spindle power: 3KW / 4.5KW / 400HZ/24000rpm/min

Rated Power: 800W

Power requirements: Ac380V ± 5% 50HZ (110V 50HZ)

Processing size: 1300 × 2500 × 230mm

Empty process speed :0-8800mm / min

Spindle speed 6000 ~ 24000rpm

Tool diameter Ф3 ~ Ф12.7,

The largest engraving speed: 6m/min the

Processing carving precision: <0.5/300mm

企业名片