板式换热器T2【油冷却器】

本公司供应阿法拉伐板式换热器T2【油冷却器】质量保证，欢迎咨询洽谈。

T2

Plate heat exchanger

Applications
General heating and cooling duties.

Standard design

The plate heat exchanger consists of a pack of corrugated
metal plates with portholes for the passage of the two fluids
between which heat transfer will take place.

The plate pack is assembled between a fix frame plate and
a movable pressure plate and compressed by tightening bolts.
The plates are fitted with a gasket which seals the interplate
channel and directs the fluids into alternate channels. The
number of plates is determined by the flow rate, physical
properties of the fluids, pressure drop and temperature program.
The plate corrugations promote fluid turbulence and
support the plates against differential pressure.

The plate and the pressure plate are suspended from an
upper carrying bar and located by a lower guiding bar.

Connections are located in the frame plate or, if either or both
fluids make more than a single pass within the unit, in the
frame and pressure plates. 

Typical capacities

Liquid flow rate

Up to 2 kg/s, depending on media, permitted pressure drop
and temperature program..

Plate types
T2B

Frame types
FG

Working principle

Channels are formed between the plates and the corner ports
are arranged so that the two media flow through alternate
channels. The heat is transferred through the plate between
the channels, and complete counter-current flow is created
for highest possible efficiency. The corrugation of the plates
provides the passage between the plates, supports each
plate against the adjacent one and enhances the turbulence,
resulting in efficient heat transfer..