RPAP5 （butt welding of aluminum-plastic composite pipe）inner and outer adopt imported high temperature resistant polyethylene (PE-RT) raw materials, the middle is aluminum. Between layers we use imported hot melt adhesive. According to implementation of the standards CJ/T159----2006.
RPAP5 to allow long-term working temperature is 95 ℃, allowing long-term working pressure 1.25MPa, temperature failure moment was 110 ℃.Bursting pressure test value is7.98Mpa ,far exceeded the national standard. The tests approve that RPAP5 is heat-resistant and voltage-resistant.
一．Main technical parameters
Thermal conductivity0.45w/(m·k)
Thermal expansion 0.025mm/(m·k)
Bending radius≥5D
Medium temperature-40℃----95℃
Pipe ring radial direction2400----3320N
Gas permeability 0
Pipeline inwall roughness 0.0004mm
Bursting pressure 6.0----9MPa
Working temperature 95℃
Working pressure1.25Mpa
二．Range of application
Building high-temperature radiator heating system、Central air-conditioning piping system、Solar pipeline system、Wall-hung boilers heating pipe system、Pharmaceutical companies on the system temperature water supply system，etc.
RPAP5
￥10 元/个
RPAP5对接焊铝塑复合管
￥100 元/个
赛诺普管件
￥20 元/个
