托马斯法兰盘密封高温胶

				High temperature Adhesive（THO4052）

				Outline

				This strain acrylic acid polyester adhesive, the double component, the normal temperature fast solidification, the cementation intensity is high, the heat resistance is fine,Operates easily.

				Applications

				Is suitable the metal, the ceramics, the compound materials which works under the hot conditions from stick with stick mutually, also is suitable for each kind of vessel divulging, the cylinder body crack, the casting cementation, the packing, the seal, stops up leaks with the repair as well as the electric appliance, the measuring appliance gives off heat the part cementation and the seal.

				Features

				· outward appearance: The A component is the tinted thick liquid, non-solid particle. The B component is the tinted paste shape. 

				· the curing velocity is quick, when 25℃;, 1-3hour at the beginning of minute solidifies, 18 hour close biggest cementation intensities. 

				· the cementation intensity is high, durable, bears the ultraviolet ray performance to be fine. 

				· the heat resistant performance is good, the adaptation temperature range is broad, after the cementation still had the good cementation effect under the high temperature. 

				· the cementation surface does not need to process strictly, two component isometric mix, easy to operate. 

				· bears the medium performance to be fine, oil resistant, water, acid, petroleum, ethyl alcohol and so on. 

				· security and toxic characteristic: Has the extremely slight unusual smell, non-inspiration danger, after solidification actual non-toxic. · the storing stability is good, the storage time is half year.

				The main technical performance target is as follows:

Heat resistance scope：-40－+380℃

150℃: Longitudinal strength  3－5 MPa

				1. Clean the surface of the material,make sure they have no dusty or oil on them,Wait until they are dry.

				2. Mixing A and B 10:1。2-1。5with adhesive smear. In the temperature is lower than 25℃; components move evenly after 10:1。2-1。5 proportion used; Joins B after the proportion, both can be enhance the reaction rate, and can be enhance the intensity. 

				3.Will adjust the good liquid cement to spread in is stuck the surface, will close up, the compaction, settles for 2~4 hours.

				Notes

				1.The Adhesive  tool does not to be mix used. 

2. It has odor of acrylic ,it is necessary to keep it well ventilated and away from fire .

4.Caps of adhesive tube cannot be exchanged to avoid going bad and losing efficacy .It can be stored at well-ventilated places with low temperature,and away from fire.