DuraCel RM 高效箱式过滤器
• High efficiency
• High dust holdingcapacity
• Temperature limits: upto
• Economical in use
• High blow-out pressure
Application
DuraCel RM is a heavy duty, high efficiency filter designed for use with centrifugal compressors and gas turbines where severe surging and pulsation occur.
Construction
DuraCel RM has metal cell sides with spot welded face guards and a flange header on the air entering and air leaving sides. The media pack is folded between aluminium separators in a pleated design. The edges of the separators are longer than the inside folds of the media. This construction prevents the separators from moving and puncturing the media. The filter media is a finely woven glass mat which is capable of operating temperatures up to
Installation and Maintenance
DuraCel RM filters are replaceable with other AAF filters and with competitive brands without any alteration to the filter frame. When installing DuraCel RM filters, be sure to insert them in the proper direction to the airflow as indicated by the eyes and hands located on the cell side. Place the filter in the frame, secure the filter against the frame gasket by rotating the spring lock into position, and tighten the thumb screws. Where the DuraCel RM frame is flush against a plenum wall and wing nuts cannot be used, hex nuts are provided for securing the spring lock. Spring locks are staggered to prevent interference with the adjacent filter frames.DuraCel RM filters are fully disposable when their final resistance has been reached. There are no wire baskets or other retaining devices required to change the filters.
DuraCel® RM
Dimensions
DuraCel RM is available in two standard sizes: 24 x 24 x 12 inch and 24 x 24 x 6 inch with ratings of
m
requirements. This will affect the filter life and, therefore, the intervals between replacements. Special sizes are also available in 24 x 12 x 12 inch (
摘自:深圳市科尼德环境科技有限公司