铝型材双头切割锯LJB2A-500×4200
Double-head Cutting Saw for Aluminurm Profile LJB2A-500×4200
◆锯片主轴采用高精密主轴,专用进口硬质合金锯片
◆切割进给运动与机头的左右移动导轨,均采用进口直线轴承运动副
◆锯片进给由液压阻尼气缸提供动力
◆加工范围大,切割长度达4200mm,切割角度为90°、45°、22.5°,三种角度按钮自动转换
◆后托料架随活动机头的运动场自动伸缩
◆安全罩随锯片的进、退自动起落,安全性好
◆气控阀控制摆角气缸,避免电磁阀长期带电引起失效
The main axle of the saw is made precisely highly , and isspecialized for the hard alloy saw.The go and back of the cutting can synchronous with the left and right moving of the head of the machine , is made by the linary bearing pair . The moving of the saw is motivated by the hydraulic damper cylinder . The range of the production is vrery large , and the length of cutting caul arrive 4200mm , the cutting angles are 90,45 and 22.5. They can change into another automatically. The frame carl go and back automatically with the head of the machine . The safety precaution can up and down with the saw safely . The tyre air valves control the corner cylinder , and avid the electricity of the machine.