脉冲信号源PG1000C

报价：8.5元/个
工程价: 暂无
所在地：
更新时间：2008-11-09 11:40:03
信息有效期：1年
登录后查看联系信息立即登录
询价留言免费索取技术资料

详情介绍

Features and usage

1. The Pulse Signal Generator - Maximum Pulse Output Voltage can reach +5V(50Ω Load). Its Repeated Frequency Range is selected by the Internal Oscillator Frequency (1MHz-10MHz) and Crystal Oscillator Frequency (10MHz). (1Hz-10MHz to choose INT mode, 10Hz-10MHz to choose X-TAL Mode)

2. At X-TAL mode, using the knob, by the 7 pre-set frequency range, you can set a frequency accurately. At the INT mode, you can set a stochastic Repeated Frequency.

3. It can generate a Pulse Wave of high quality (1Hz-10MHz),thus it has a very wide application in all kinds of circuit test. In the analyzing and design of a digital circuit, it can be used as a Clock Pulse Source.

Specifications

1.Oscillator Mode

INT Mode

EXT. Mode: +(up) , -(down)

Crystal Oscillator Mode: X-TAL

Single Oscillator Mode: Manu

2.Oscillator Frequency

INT: 1Hz-10MHz / 1-7 ranges (Freq. changes at each range)

X-TAL: 10,100,1K,1M,10M(Hz) (Frequency stability: ?00ppm)

3.External Input

Max.Input Voltage : -1V, +10V

Input Voltage: ≥+1V

Pulse width: ≥20nS

Frequency width: 10Hz-10MHz

4.Single Oscillator Mode Input
       Method: press the switch
 
5.Pulse Output
       Output voltage: 0 ~ +5V adjustable (50Ω Load)
                             0 ~ +10V adjustable (open status)
       Rising time     : <10nS (50Ω Load，+2.5V -- +5V)
       Falling time    : <10nS (50Ω Load，+2.5V -- +5V)
       Period INT      : 100nS-1000mS/ 1-7 ranges (Freq. changes at each range)
       X-TAL           : 100nS-100mS /1-7 ranges   (Freq. fixed)
       Delay time      : 0-50mS/1-7 ranges               (Freq. changes at each range)
       Pulse width    : 50nS-50mS /1-7ranges         ( Freq.Changes at each range)
 
6.Trigger Output
       Output Method: C-MOS (74HCO2)(50Ω Load, ≥1V)